FPM6
With an enclosure height to match the height of 60-inch plasma screens, the FPM6 is the largest model in the FPM Series.
Gloss Black
With an enclosure height to match the height of 60-inch plasma screens, the FPM6 is the largest model in the FPM Series. Compared to the other models, its enclosure is not only longer, it's wider too, which allows the use of two larger Kevlar® cone bass/midrange drivers each side of the Nautilus™ tube-loaded tweeter. Higher output level capability and greater bass extension result, but timbre matching allows complete freedom to mix different models for left and right front, centre and surround if desired.
Freedom and flexibility extend to the four possible mounting options. Use the supplied wall bracket if no tilting of the speaker is needed. If it is, use an Omnimount® type 20.0 or other compatible bracket to get up to 10º of downward tilt. If using a tabletop stand for your screen, simply do the same with the speakers, using the optional table stand. Finally, there is an optional floor stand that supports the speaker at the ideal listening height.
| Woven Kevlar | |
| Crossover Tuning | |
| Nautilus Tapering Tube | |
| Technical features | Nautilus™ tweeter Kevlar® cone bass / midrange Flowport™ |
| Description | 2½-way vented-box system |
| Drive units | 2x ø130mm (5 in) Kevlar® cone bass / midrange 1x ø25mm (1 in) alloy dome high-frequency |
| Frequency range | -6dB at 55Hz and 42kHz |
| Frequency response | 65Hz – 22kHz ±3dB on reference axis |
| Dispersion | Within 2dB of reference response |
| Horizontal: | over 40º arc |
| Vertical: | over 10º arc |
| Sensitivity | 88dB spl (2.83V, 1m) |
| Harmonic distortion | 2nd and 3rd harmonics (88dB, 1m) <1% 100Hz – 20kHz <0.5% 200Hz – 10kHz |
| Nominal impedance | 8Ω (minimum 3.5Ω) |
| Crossover frequencies | 180Hz, 4.8kHz |
| Recommended amplifier power | 25W – 150W into 8Ω on unclipped programme |
| Max. recommended cable impedance | 0.1Ω |
| Height | 270mm (10.7 in) horizontal orientation |
| Width | 794mm (31.3 in) |
| Height: | 1312mm (51.6 in) |
| Width: | 262mm (10.3 in) |
| Depth: | 224mm (8.8 in) |
| Net weight (speaker + wall plate) | 6.8 kg (15 lb) |
| Finishes | High gloss black with black cloth |
| Table & floor stands: | Silver |
Related products
FPM4
The FPM4 features Kevlar® cone bass/midrange drivers and Nautilus™ tube-loaded tweeters and matches the height of 42-inch screens.
FPM5
With a height to match 50-inch TV screens, the FPM5 is a 2½-way system featuring a pair of Kevlar® cone bass/midrange drivers, either side of a Nautilus™ tube-loaded tweeter.
PV1D
The PV1D will change the way you view subwoofers. Not just because of its inherently stable curved form, but because its digital platform which extends performance and flexibility.