Its long-throw 200mm driver allows the ASW608 to move the large volumes of air needed for high-quality low-frequency output, and its audiophile-standard 200W Class D amplifier keeps the unit running cool, even when the music or movie action is whipping up a storm.
In all of the 600 Series subwoofers, the bass driver diaphragms are constructed from a rugged, finely-tuned mix of paper pulp, Kevlar® fibres and resin, which provides the stiffness needed to withstand the tremendous physical forces exerted by the voice coil and pressures inside the cabinet.
Ultra-solid construction delivers slamming bass, drum kicks, and special movie effects. Deformation is minimised; bass precision, power and enjoyment are maximised.
|Drive unit||200mm (8in) paper / Kevlar® cone long-throw|
|Rated power consumption||40W|
|Standby power consumption||0.5W|
|Signal / noise||>90dB|
|Functions||Volume level – line in
Volume level – speaker in
Low-pass filter frequency
Low-pass filter bypass (line in only)
Bass roll-off alignment
Auto sense on/standby
|Inputs||Stereo Line In (RCA Phono)
Speaker In (Binding post)
12v trigger (3.5mm jack)
|Height||260mm (10.2in) not including feet|
|Depth||330mm (13in) including grille and controls|
|Net weight||8.85kg (19.5lb)|
|Grille||Black with Black
Grey with White