ASW12CM

This versatile subwoofer complements the rest of the CM range with the powerful, deep bass that has come to be expected from Bowers & Wilkins subwoofers.

ASW12CM

This versatile subwoofer complements the rest of the CM range with the powerful, deep bass that has come to be expected from Bowers & Wilkins subwoofers.

Wrapped in an exquisitely veneered cabinet, the 12 inch voice coil paper/Kevlar® driver is driven and controlled by the mega efficient 500W audiophile standard Class D amplifier and switch mode power supply, delivering immense power when the signal demands.

This combination can move vast amounts of air yet not lose any of the control that is necessary for accurate low-frequency output.

ASW12CM
Description Active closed-box subwoofer system
Drive units ø300mm (12 in) paper/Kevlar® cone long-throw driver
ø76mm (3 in) dia voice coil - dual suspension diecast chassis
Frequency range -6dB at 18Hz and 25/140Hz adjustable (EQ at A)
Frequency response ±3dB 25Hz – 40/140Hz adjustable (EQ at A)
Bass Extension -6dB at 18Hz (position A)
-6dB at 23Hz (position B)
-6dB at 28Hz (position C)
Amplifier Power output: Amplifier Power output: 500W
Rated power consumption: 94W
Standby: 0.8W
Idle (ON no signal) 11.8W
Input impedance: 33kΩ
Signal / noise: >80dB
Functions: Input level (line in)
Input level (speaker in)
Low-pass filter frequency
Low-pass filter bypass (line in only)
Bass extension
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs Line In (RCA Phono)
Speaker in (Binding post)
12v trigger (3.5mm jack)
Low-pass filter Active 4th-order, variable cut-off frequency
Height: 395 mm (15.5 in) not including feet
Width: 395 mm (15.5 in)
Depth: 432mm (17.0 in) including grille and controls
Net weight 24.5kg (54 lb)
Finish  
Cabinet: Gloss Black
Grille: Black

Copyright © 2014 Bowers & Wilkins. All rights reserved.