CWM LCR7
The CWMLCR7 is a three-way in-wall speaker that offers the audio quality of a high-quality stand-alone model.
- Email to a friend
- CWM LCR7 Manual
- CWM LCR7 Drawings
- CWM LCR7 Info sheet
- CWM LCR7 Brochure
- Register your CWM LCR7
The CWMLCR7 is a three-way in-wall speaker that offers the audio quality of a high-quality stand-alone model.
It features three 100mm (4in) mica cone bass drivers, a 100mm (4in) woven Kevlar cone midrange driver and a Nautilus tube-loaded 25mm (1in) aluminium dome tweeter. The mica bass drivers provide the low frequency snap characteristic of any really good loudspeaker.
| Technical features | Nautilus™ tube-loaded tweeter Woven Kevlar® cone midrange Paper/mica cone bass |
| Description | 3-way in-wall speaker system |
| Drive units | 1x ø25mm (1 in) Nautilus™ tube-loaded tweeter 1x ø100mm (4.0 in) woven Kevlar® cone midrange 3x ø100mm (4.0 in) paper/mica cone bass |
| Frequency range | -6dB at 54Hz and 30kHz |
| Frequency response | 65Hz-30kHz ±3dB on reference axis |
| Sensitivity | 85dB spl (2.83V, 1m) |
| Nominal impedance | 8Ω (minimum 3.8Ω) |
| Crossover frequency | 3.2kHz |
| Recommended amplifier power | 20W - 150W continuous into 8Ω on unclipped programme |
| Frame size | 625mm (24.6 in) x 175mm (6.9 in) |
| Cut-out size | 600mm (23.6 in) x 150mm (5.9 in) |
| Min depth req | 101mm (3.9 in) from wall surface |
| Net weight | 4.2kg (9.3lb) |
| Finish | Semi-matt white suitable for customising or pre-painting (paint mask included) |
| Accessories | Pre-mount kit for new construction (PMK c65) Back Box (BB LCR7 |
Related products
ISW-4
The ISW-4 in-wall subwoofer ifeatures two long-throw 200mm (8in) drivers, which allow it to move the large volumes of air needed for high-quality low-frequency output.