CCM664

The CCM664 features an adjustable, tilt-offset 25mm (1in) soft dome tweeter, and a 150mm (6in) woven glassfibre bass/midrange driver.

CCM664

The CCM664 features an adjustable, tilt-offset 25mm (1in) soft dome tweeter, and a 150mm (6in) woven glassfibre bass/midrange driver. Quick and easy to install, the speaker also incorporates a three-position EQ switch for a better off-axis response. A cost-effective route to high quality ceiling mount sound.

CCM664
Description 2-way in-ceiling system
Drive Units 1x ø25mm (1in) soft dome tweeter

1x ø150mm (6in) black glassfibre cone bass/midrange
Frequency Range (-6dB) 45Hz – 35kHz
Recommended Amp Power 25 – 130w
Sensitivity SPL (2.83V, 1m) 87dB
Impedance Nominal (min) 8Ω (4.5Ω)
Frame diameter 240mm (9.5in)
Cut-out diameter 202mm (8in)
Depth behind surface 133mm (5.2in)
Protrusion 4mm (0.2in)
Pre-mount Kit C6
Back Box 6C

Related products

CCM663

CCM663

This high-performance 6in in-ceiling speaker features a Nautilus swirl-loaded 25mm (1in) aluminium dome tweeter that pivots for adjustable off-axis treble response.

CCM663SR

CCM663SR

A high-performance, in-ceiling surround speaker that’s ideal for the surround sound channel in a home theatre set-up, or for bringing stereo sound to rooms where space is limited.

CCM664SR

CCM664SR

The CCM664SR is a dual, two-way ceiling speaker combining two offset tweeters and a twin voice coil bass/midrange driver to allow either for a combined stereo signal from one speaker, or for rear-channel surround sound.

CCM665

CCM665

The entry-point in the CI600 in-ceiling range, the CCM665 is perfect for smaller listening areas like bathrooms or kitchens.

Copyright © 2014 Bowers & Wilkins. All rights reserved.